ZUPAN d.o.o., Celestrina 3, 2229 Malečnik, Slovenia
ZUPAN d.o.o., Celestrina 3, 2229 Malečnik, Slovenia
Cart:
0,00 €
0

Cart is empty

  • Home
  • / Sales program
Categories Filters

Filter products

Supplier

Sales program

Display mode:
Pump suitable for boom sprayers. Maximal pump flow is 135 l/min at 20 bar and 540 turns of the P.T.O. shaft. Suitable for sprayers with capacity up to 1500 l and...
Price:
890,60 €
up to -5%
up to -5%
For working pressure up to 40 bars. Made from brass. With three positions (regulation of 15° and it closes at 180°). With non-drop-valve, tread ¼˝.
Price:
25,86 € 24,57 €
up to -5%
For working pressure up to 40 bars. Made from brass. With three positions (regulation at 15° and it closes at 90°). With non-drop-valve. Thread ¼˝.
Price:
27,94 € 26,54 €
For working pressure up to 40 bars. Made from brass. With three working positions (regulation at 15° and it closes at 180°). Thread ¼˝.
Price:
35,87 €
For working pressure up to 40 bars. Made from brass. With three adjustable positions. Thread ¼˝.
Price:
21,11 €
For working pressures up to 40 bars. Made from brass. With anti – drop membrane. It is used together with “simple piece” nozzle holder. Thread ¼˝.
Price:
20,01 €
Made of brass. Suitable ceramic nozzles ATR, TBX or 15 mm diameter.
Price:
1,46 €
Nut for attachment of the nozzle holder. Thread ¼”. S. 19mm, thickness: 5 mm.
Price:
1,17 €
Adjustable attachment, which allows width regulation of spray jet and results in higher / wider reach of the spray. Made of brass. The adjustable attachment is simple...
Price:
10,49 €
Adjustable attachment, which allows width regulation of spray jet and results in higher / wider reach of the spray. Made of plastic. The adjustable attachment is simple...
Price:
6,41 €
up to -5%
For working pressures up to 20 bar. Made from plastic and brass with thread ¼”. The spray angle can be adjusted as you wish.
Price:
7,69 € 7,30 €
up to -5%
For working pressures up to 20 bar. Made from plastic and brass. With thread ¼”. The spraying angle can be adjusted as you wish. For two nozzles.
Price:
9,52 € 9,04 €
up to -5%
For working pressures up to 20 bar. Made from plastic and brass. With thread ¼”. The spraying angle can be adjusted as you wish. For two nozzles.
Price:
9,03 € 8,58 €
Boom sprayer nozzle holder. Maximum working pressure 20 bar. With 3/8” cap. With the nut for attaching the nozzles. Measurement of connecting hose: 20 mm...
Price:
2,21 €
Nozzle holder for boom sprayers. Working pressures up to 20 bar. With anti- drop valve. With bayonet attachments for nozzle nuts. The nozzle nut is not...
Price:
4,53 €
Nozzle holder for boom sprayers. Working pressures up to 20 bar. With anti- drop valve. With bayonet attachments for nozzle nuts. The nozzle nut is not...
Price:
4,53 €
Nozzle holder for boom sprayers – 3 nozzles. Working pressures up to 20 bar With anti- drop valve. The nozzles are chosen with turns of the housing. In the...
Price:
10,25 €
Nozzle holder for boom sprayers – 3 nozzles. Working pressures up to 20 bar With anti- drop valve on the left side. The nozzles are chosen with turns of the...
Price:
12,81 €
Nozzle holder for boom sprayers – 3 nozzles. In V shape. Working pressures up to 20 bar With anti-drop valve on the left side. The nozzles are chosen with turns...
Price:
14,64 €
Nut for boom sprayers nozzle holders. Thread: 3/8”.
Price:
0,85 €
Bayonet nut for boom sprayer nozzle holders. Universal design - it fits for most nozzles with fanny jet.
Price:
1,00 €
Quick fitting cap for boom sprayers. Suitable for round Holowcone nozzles.
Price:
1,00 €
Quick coupling nut for boom sprayer nozzle holders. It is used to completely stop the flow.
Price:
1,00 €
Gasket for quick fitting caps. Suitable for all nozzle holders. Made of rubber.
Price:
0,61 €
Ball valve – short, for working pressures up to 50 bar. Made of chromed brass. With short handle. With outer thread ½”.
Price:
9,76 €
up to -5%
Ball valve for pressure regulator and pumps. For working pressures up to 50 bar. With outer thread 3/8” – ½”. For left or right.
Price:
from 9,50 €
Pressure gauge for boom sprayers. Scale 0-25 bar. Housing made of stainless steel. Diameter 63 mm. Thread ¼”.
Price:
16,71 €
Pressure gauge with asymmetrical scale, accuracy 1,6 in the range from 0-5 bar, diameter 60 mm with stainless steel housing, thread ¼˝. Resistant on liquid...
Price:
51,24 €
Pressure gauge with asymmetrical scale, accuracy 1,6 in the range from 0-5 bar, diameter 60 or 100 mm, with stainless steel housing, thread ¼˝. Resistant on liquid...
Price:
from 51,24 €
Pressure gauge for fan sprayers. With scale from 0 – 40 bar. Housing of stainless steel. Diameter 63 mm. Thread ¼”.
Price:
16,71 €
Pressure gauge for fan sprayers. Housing made from plastic, with diameter 63 mm. With scale from 0 - 80 bar. Thread ¼”.
Price:
14,08 €
Pressure gauge with asymmetrical scale, accuracy 1,6 in the range from 0-15 bar, diameter 60 or 100 mm, with stainless steel housing, thread ¼˝. Resistant on liquid...
Price:
from 46,01 €
For tank rinsing. Up to 2 m dia. 360° complete coverage. With integrated flow reducer for rotating speed. Possibility of pressure adjustment.
Price:
67,10 €
Reduction nut made of brass. With outer thread.   Dimensions: T1= 3/8" T2= 1/2" L1= 10 mm L2= 10 mm L= 25 mm H= 22 mm
Price:
3,36 €
Reduction nut made of brass. With outer thread.   Dimensions: T1=T2=1/2" L1=L2=11 mm L= 27 mm H=22 mm C=14 mm
Price:
3,90 €
Reduction nut made of brass. The thread is longer on one side with a groove for gasket.   Dimensions: T1=T2=1/2" L1=12 mm L2=16 mm L=35...
Price:
6,71 €
Made from brass.   Dimensions: T= ½” L= 6mm H= 27 mm
Price:
3,72 €
up to -5%
Smaller suction filter suitable for electric pumps with flow up to 20 l / min. Filter net made of stainless material. The filter dimension is 50 mesh per inch....
Price:
8,42 € 8,00 €